TestEquity FH5 Forced Air Oven
 
TestEquity FH5 Forced Air Oven
Description: TestEquity FH5 Forced Air Oven
S/N: 11031412
P/N: 9071284
TestEquity FH5 High Performance Oven is engineered to meet the most
critical temperature requirements. They are designed for continuous
drying operations at temperatures up to 306°C. Factory-set
overtemperature protection prevents control failure from damaging
contents and guards against burnout. The Watlow controller is capable
of a 40 step ramp and soak profile, or 4 files with 10 steps per file.
Time and temperature are displayed in a three-digit LED readout for
fast and accurate setting. Horizontal air flow provides fast heat-up
and recovery and ensures rapid drying. Heated air is continuously
circulated by twin turbo blowers. Blowers also circulate air to motor
bearings to prolong motor life. The stainless steel shelves are
adjustable. Adjustable air intake and exhaust ports can be opened for
fast drying of high-moisture content samples.
A high temperature gasket door seal eliminates air leakage and ensures
longer gasket life while being subjected to extreme operational
temperatures. This unit includes long-lasting, low-watt density heating
elements. It also has adjustable heavy-duty hinges and a door latch
that are designed for lifetime service.
DESCRIPTION:
Heating to 306°C Temperature
40-Step Programmable Ramp & Soak Controller
Adjustable Overtemperature Limit
Type-430 Mirror Finish Stainless Steel Interior
Durable Powder-Coat Paint Exterior Finish
Horizontal Airflow, Forced Air Convection
Exceptional Temperature Uniformity
Air Intake and Exhaust Ports
Two-Inch Feedthrough Port on Left Side
Includes 2 Adjustable Stainless Steel Shelves
SPECIFICATIONS:
EXTERIOR DIMENSIONS (W × D
× H) 35 × 30.25 × 38
INTERIOR DIMENSIONS (W × D
× H) 20.5 × 20 × 20.125
VOLUME
4.7 cu. ft.
SHELF DIMENSIONS (W × D)
20.1 × 20.1
UNIT WEIGHT 325
lbs
INTERIOR METAL
300 Series Stainless Steel
EXTERIOR METAL
Painted cold roll
OPERATING TEMP RANGE 40°C
above ambient to 300°C
UNIFORMITY
±0.9°C Typical
CONTROL TOLERANCE
±0.1°C Typical
HEATUP TIME (empty) to 80°C,
10 minutes
to 150°C, 22 minutes
to 306 °C, 35 minutes
RECOVERY TIME
(30 second door opening) to 80°C, 4
minutes
to 150°C, 5 minutes
to 306 °C, 5 minutes
AIRFLOW
7.6 CFM @ 80°C
AIR CHANGES PER HOUR 93
AIR VELOCITY ACROSS SHELF 145 Linear Feet/Minute
TEMPERATURE STABILITY 0.3°C @
150°C
CONTROLLER TYPE
Watlow EZ-Zone
RESOLUTION
0.1°C
INPUT POWER
230V, 50/60 Hz, 12.0 Amps, 2200W
MAX HVAC LOAD
9.7K BTUs/hr
SAFETY CERTIFICATIONS TUV listed
to UL 61010-1, EN 61010-1, CSA 61010-1, CE
Ref# 40456ke
Request
a Quote Contact
Us
Back
|
