Bahnson Environmental Specialties ES2000 Reach-In Benchtop
Evironmental Chamber
Bahnson Environmental Specialties
ES2000 Reach-In Benchtop Environmental Chamber
Description: Bahnson Environmental Specialties ES2000 Reach-In Benchtop
Environmental Chamber
Model ES2000 CDMD-BT
The ES200 is a reach-in Benchtop environmental chamber designed for
high-demand testing, processing and conditioning.
CDMD = Refrigerant cooled, with humidification and desiccant-based
dehumidification, temperature and humidity control
-BT = Benchtop 12 cu.ft.
2 Shelves
Temperature range: 2 – 70°c (36-158°F)
Humidity Range: 10 – 96% RH
Max Shipping Weight: 261kg (575 LB)
Condensing Unit: 1/3 HP, R134a
Electrical Power: 208-230V / 1ph / 60hz
Voltage Utilization: 198 – 253
Full Load Amps: 21.3
Cord Set(Optional): NEMA 14-30
Total Heat of Rejection:
Normal Maximum
1876 W @
25°c 1920 W @ 10°c
Ambient Temperature: 18°c
(65°F) to 25°C (77°F)
Ambient Humidity: 45 to 55% RH
Operating Altitude: <2000m
(6561 ft)
Operating Environment: Indoor
Temperature Uniformity: +/-
0.3°C (+/- .06°F)
Humidity Uniformity: +/- 3% RH
Interior Dimensions: 91 cm x 65 cm
x 62 cm (W x D x H)
(36” x 25.5” x 24.5”)
Exterior Dimensions: 104 cm x 74
cm x 119 cm (W x D x H)
41” x 29” x 47”
Shelving: 2
Stainless Steel Shelves / 14 Available
Shelving Holding Capacity: 59 kg (130lb)
Shelf Area: 2.4
mˆ2 (6.5 ft ˆ2)
Interior Finish:
22 Gauge #4 304 Stainless Steel
Exterior and Finish: Steel with
Grey Enamel Finish
Alarm Signals:
Visual, Audible, Dry Contacts
Water Supply Requirements : < 0.5 ml/s (0.5 GPH) @
< 1.7 bar (25 psi)
Water Quality Resistivity Limits: > 25 k ohms
& < 15 M ohms
Water Supply/ Drain Connection:
0.25” OD Tube Quick Connect
Water Quality Equivalent Hardness: < 20 ppm or 1
GPG
Water Quality pH level:
> 6.7
Waste Water Drain 0.05” OD Stainless Steel
Typical Heat Up Times (30 sec. Door Open)
Ambient to + 37°C
(99°F) <
5 Minutes
+37°C (99°F) to +
50°C (122°F)
< 7 Minutes
+10°C (50°F) to +
50°C (122°F)
< 15 Minutes
Typical Recovery to Setpoint (30 sec, door open)
@ + 50°C
(122°F)
< 2 Minutes
@ + 10°C
(50°F)
< 3 Minutes
Munters Desiccant Dehumidifier
Model: MG90
Power requirements: 115V 1Ph 50/60Hz
Specifications:
Width: 257mm
Depth: 275mm
Height: 388mm
Weight: 10 kg
Process air:
Free blowing at 50Hz (m^3 / h)
100
Free Blowing at 50Hz (m^3 / h)
120
Rated airflow (m^3 / s)
0.025
Rated airflow (m^3 / h)
90
Available static pressure 50Hz (Pa)
100
Available static pressure 60Hz (Pa)
120
Fan motor power (kw)
0.090
Reactivation air:
Rated airflow (m^3 / s)
0.005
Rated airflow (m^3 / h)
20
Available static pressure (Pa)
100
Reactivation air heater:
Heater power (kw)
0.65
Temperature increase across heater
(°C) 97
Miscellaneous date:
Operating temperature (°C)
-20 / +40
Drive motor power (W)
5
Max noise level unducted (dBA)
56
Air filter, standard
EU3
Ref# 40175ke
Request
a Quote Contact
Us
Back
|
